Bolt size chart
A bolt is named by its thread: 1/2-13 is 1/2 in across with 13 threads per inch, M12 x 1.75 is 12 mm across with 1.75 mm between crests. The wrench fits the head, not the thread, so the head size is listed separately: a 1/2 in hex bolt takes a 3/4 in wrench, an M8 a 13 mm one.
threadsizes.com/bolt-size-chart · printed Nov 20, 2026 · check critical dimensions against the standard
| Size | Dia. | UNC | UNF | Head wrench | Nut wrench | Nut thick. | Socket head key | Thread length ≤ 6 in / > 6 in long | Tap drill | Clearance |
|---|---|---|---|---|---|---|---|---|---|---|
| 1/4 | 0.2506.35 mm | 20 | 28 | 7/16 0.438 | 7/16 0.438 | 7/32 0.219 | 3/16 | 0.750 / 1.000 | #7 | 9/32" |
| 5/16 | 0.3137.94 mm | 18 | 24 | 1/2 0.500 | 1/2 0.500 | 17/64 0.266 | 1/4 | 0.875 / 1.125 | F | 11/32" |
| 3/8 | 0.3759.53 mm | 16 | 24 | 9/16 0.563 | 9/16 0.563 | 21/64 0.328 | 5/16 | 1.000 / 1.250 | 5/16" | 13/32" |
| 7/16 | 0.43811.11 mm | 14 | 20 | 5/8 0.625 | 11/16 0.688 | 3/8 0.375 | 3/8 | 1.125 / 1.375 | U | 15/32" |
| 1/2 | 0.50012.70 mm | 13 | 20 | 3/4 0.750 | 3/4 0.750 | 7/16 0.438 | 3/8 | 1.250 / 1.500 | 27/64" | 9/16" |
| 9/16 | 0.56314.29 mm | 12 | 18 | * | 7/8 0.875 | 31/64 0.484 | – | * | 31/64" | – |
| 5/8 | 0.62515.88 mm | 11 | 18 | 15/16 0.938 | 15/16 0.938 | 35/64 0.547 | 1/2 | 1.500 / 1.750 | 17/32" | 11/16" |
| 3/4 | 0.75019.05 mm | 10 | 16 | 1-1/8 1.125 | 1-1/8 1.125 | 41/64 0.641 | 5/8 | 1.750 / 2.000 | 21/32" | 13/16" |
| 7/8 | 0.87522.23 mm | 9 | 14 | 1-5/16 1.313 | 1-5/16 1.313 | 3/4 0.750 | 3/4 | 2.000 / 2.250 | 49/64" | 15/16" |
| 1 | 1.00025.40 mm | 8 | 12 | 1-1/2 1.500 | 1-1/2 1.500 | 55/64 0.859 | 3/4 | 2.250 / 2.500 | 7/8" | 1-3/32" |
Wrench sizes are across the flats of a hex bolt or hex cap screw head and of a standard (finished) hex nut, in inches with the decimal size. The nut takes a different wrench from the head on 7/16 (head 5/8, nut 11/16). Socket head key is the Allen key for a socket head cap screw (ASME B18.3), not for the hex bolt. Thread length is the nominal threaded length of a hex bolt (ASME B18.2.1): bolts 6 in long or shorter / longer than 6 in. Tap drill is for the coarse thread; clearance is the normal fit (ASME B18.2.8). The flat or lock washer that goes under the head or nut is on the washer size chart. The size says nothing about strength: that is the grade, marked on the head, on the bolt grade chart.
| Size | Pitch | Fine | Wrench | Head height | Nut thick. | Socket head key | Socket head dia. | Tap drill | Clearance |
|---|---|---|---|---|---|---|---|---|---|
| M3 | 0.5 | not covered | 5.5 | * | 2.4 | 2.5 | 5.5 | 2.5 | 3.4 |
| M4 | 0.7 | not covered | 7 | * | 3.2 | 3 | 7 | 3.3 | 4.5 |
| M5 | 0.8 | not covered | 8 | 3.5 | 4.7 | 4 | 8.5 | 4.2 | 5.5 |
| M6 | 1 | 0.75 | 10 | 4 | 5.2 | 5 | 10 | 5 | 6.6 |
| M8 | 1.25 | 1 | 13 | 5.3 | 6.8 | 6 | 13 | 6.8 | 9 |
| M10 | 1.5 | 1.25, 1 | 16 | 6.4 | 8.4 | 8 | 16 | 8.5 | 11 |
| M12 | 1.75 | 1.5, 1.25 | 18 | 7.5 | 10.8 | 10 | 18 | 10.2 | 13.5 |
| M14 | 2 | 1.5 | 21 | 8.8 | 12.8 | * | * | 12 | 15.5 |
| M16 | 2 | 1.5 | 24 | 10 | 14.8 | 14 | 24 | 14 | 17.5 |
| M18 | 2.5 | 1.5 | 27 | * | * | * | * | 15.5 | 20 |
| M20 | 2.5 | 1.5 | 30 | 12.5 | 18 | 17 | 30 | 17.5 | 22 |
| M22 | 2.5 | 1.5 | 34 | * | * | * | * | 19.5 | 24 |
| M24 | 3 | 2 | 36 | 15 | 21.5 | 19 | 36 | 21 | 26 |
All sizes in mm. Wrench is across the flats of an ISO hex head; the ISO 4032 nut takes the same wrench, and its thickness is the ISO 4032 (style 1) figure: DIN 934 nuts are a little thinner. Socket head key and diameter are for ISO 4762 socket head cap screws. Older DIN 933 and 934 parts, still sold, use 17 mm on M10, 19 mm on M12, 22 mm on M14 and 32 mm on M22: see metric bolt sizes. Tap drill is for the coarse pitch; clearance is the ISO 273 medium fit. "Not covered" fine pitches exist in ISO 261 but are not on this site yet.
* Left blank until enough published sources agree. Have a chart that lists it? Send a source.
Reading a bolt size
An inch bolt is written diameter, threads per inch, then length: 1/2-13 x 2 is a 1/2 in bolt with 13 threads per inch, 2 in long. A metric bolt is written M, diameter, pitch, length, all in millimeters: M12 x 1.75 x 40. The pitch is often left out when it is the coarse one.
Length on a hex bolt is measured from under the head to the tip; on a flat head screw it includes the head. To size a bolt you have, measure the thread's outside diameter with calipers (it reads slightly under the nominal size) and check the pitch with a thread gauge, or use the thread identifier.
Questions
What does M10 mean in bolt size?
M10 is an ISO metric bolt with a 10 mm major diameter. Without a pitch it means the coarse thread, 1.5 mm between crests; a fine M10 is written M10 x 1.25 or M10 x 1. An ISO M10 hex head takes a 16 mm wrench (older DIN 933 heads, still common, take 17 mm), and an M10 socket head cap screw a 8 mm Allen key.
Which bolt is bigger, 1/2 or 3/8?
1/2 is bigger: 0.500 in (12.7 mm) across the thread, against 0.375 in (9.5 mm) for 3/8. The heads differ too: a 1/2 hex bolt takes a 3/4 in wrench and a 3/8 one a 9/16 in wrench.
What are standard bolt sizes?
In inch sizes, hex bolts run from 1/4 in up in 1/16 in steps to 1/2 in, then 9/16, 5/8, 3/4, 7/8 and 1 in, each with a coarse (UNC) and a fine (UNF) thread. In metric, the common sizes are M3, M4, M5, M6, M8, M10, M12, M16, M20 and M24, with M14, M18 and M22 as second-choice sizes in ISO 261.
Standards used: ASME B18.2.1 (hex bolts), B18.2.2 (hex nuts) and B18.3 (socket head cap screws) for inch; ISO 4017, ISO 4032 and ISO 4762 for metric. Full list on standards.